Shop Services
This list is not all inclusive and is intended to provide an overview of the services we offer. If you don't see what you're looking for - please call or email so we can give you a price estimate.
If you know exactly what you need done and are ready to place an order - please go directly to Gunsmithing Services in our Store to place an order.
SHOP SERVICES
Written Appraisals, Cost Estimates | $55 |
Minimum Charge per Gun | $55 |
Per Man and Machine Hour | $105 |
Per Man Hour | $85 |
CLEAN & OIL CUSTOMER GUN
Consisting of completely stripping the gun, cleaning all parts, checking for wear, making suggestions of services needed to put in A-1 condition. | $68 |
SIGHT WORK
Bore Sighting Customer Gun | $27 |
Sight in Customer Gun - (Does not include cost of ammo) | $70 |
DRILL & TAP BARREL OR RECEIVER FOR SIGHTS
Install Insert in Pistol Sight | $51.50 |
Cut Dovetail in Barrel | $87.50 |
Per Hole | $33 |
INSTALL RECEIVER SIGHTS
Gun Drilled and Tapped | $46.50 |
SCOPE MOUNTING
Gun Drilled and Tapped | $56.75 |
Remove Obstruction from Barrel | Hourly Rate |
Remove Live Round from Chamber | $150 |
Remove Stuck Fired Case from Chamber | Hourly Rate |
Check Headspace | $46 |
GENERAL BARREL, ACTION & RIFLE WORK
CUT AND CROWN BARREL
Rifles and Shotguns/ Handguns | $75 |
PRECISION RIFLESMITHING
Bolt Gun Disassembly/ Reassembly Service | $85 |
True Remington 700 or Winchester 70 Receiver when Rebarreling | $128 |
Lap Bolt Lugs | $67 |
Thread Bolt Handle and Install Customer Supplied Knob | $75 |
Thread Muzzle/Install Brake (timing/blending required) | $175 |
Thread Muzzle for Brake/Suppressor (timing not required ) | $128 |
Install Badger Ordnance/ M16 Style Extractor | $215 |
Install Pre-Threaded and Chambered Barrel | $175 |
Cut and Crown Barrel | $75 |
Install After Market Triggers (single or two stage in bolt action rifle) | $65 |
Rifle Bedding Service (install aluminum pillars add $125) | $260 |
Inlet Rifle Stock for M5 Bottom Metal | $125 |
Inlet Stock Barrel Channel for Larger Barrel Profile (CNC) | $100 |
Thread – Chamber – Install & Crown new barrel (Ultra Mag length cartridges add $75) | $295 |
Additional charge for long action magnum length cartridges | $50 |
Additional charge for Ultra Mag length cartridges | $75 |
Additional charge for claw extractor cut | $75 |
HANDGUN WORK
1911 Trigger Job
Machine Slide for Bomar Plain Cut | $140 | |
Machine Slide for Bomar with Side Shields | $175 | |
Cut Slide for Dovetail Front Sight (sight not included) | $82.50 | |
Machine Slide for Novak Low Mount Rear Sight | $139 | |
Machine Slide for RMR/Red Dot style Sight | $145 | |
Stake on Front Sight (sight not included) | $65 | |
Install Front Sight (existing dovetail, w/o cost of sight) | $33 | |
Install Rear Sight (existing dovetail, w/o cost of sight) | $33 |
Sights Work
Accurizing and Reliability Work
Fit Barrel to 1911 (barrel not included) | $165 | |
Fit Match Bushing to Slide and Barrel (bushing not included) | $77.50 | |
Bevel Magazine Well of 1911 Auto | $65 | |
Open and Modify Ejection Port of 1911 Auto Slide | $105 | |
Fit Match Trigger to 1911 (trigger not included) | $67 | |
Fit Custom Hammer to 1911 (hammer not included) | $70 | |
Fit Safety to 1911 (safety not included) | $85 | |
Modify 1911 Frame for Beavertail Grip Safety | $165 | |
Dehorn and Break Edges for Carry | $87 | |
Tighten 1911 Slide to Frame | $108 | |
Throat, Polish Barrel and Feed Ramp on 1911 | $88 | |
Semi-Auto Pistol Reliability Job (includes throat/ polish, extractor polishing/tuning | $140 |






AR-15/ AR-10 ASSEMBLY and REPAIR SERVICES
Assemble Lower Receiver (parts not included) | $70-$130 | |
Assemble Complete Upper Assembly (parts not included) | $80-$180 | |
Perm. Attach Muzzle Device (blind pin/weld) | $55 | |
Remove previously pinned and welded muzzle device | $20 | |
Handguard install or replacement | $40 | |
Barrel change or install | $55 | |
True upper receiver face | $32 | |
Flash Hider install/time on threaded barrel (parts not included) | $25.75 | |
Install New Gas Block | $30-$60 | |
Buttstock Install | $20.60 | |
Upper disassembly/reassembly for cutting/threading muzzle | $40 | |
Cut/ Thread/Crown Muzzle (precision lathe cut threads) | $128 | |
Test fire/diagnose reliability issues (ammo not included) | $55 | |
Lathe crown barrel (stripped barrel) | $50 | |
Lathe cut and crown barrel (stripped barrel) | $75 | |
Install/adjust match trigger group (Timney, TriggerTech, etc) | $62 | |
Install Geissele Hi-Speed National Match Trigger | $75 |
