Services
This list is not all inclusive and is intended to provide an overview of the services we offer. If you don't see what you're looking for - please call or email so we can give you a price estimate.
If you know exactly what you need done and are ready to place an order - please go directly to Gunsmithing Services in our Store to place an order.
SHOP SERVICES
Per Man Hour
$85.00
Per Man & Machine Hour
$105.00
Minimum Charge per Gun
$55.00
Written Appraisals, Cost Estimates
$55.00
CLEAN & OIL CUSTOMER GUN
Consisting of completely stripping the gun, cleaning all parts, checking for wear, making suggestions of services needed to put in A-1 condition
$68.00
SIGHT WORK
Sight in Customer Gun - (Does not include cost of ammo)
$68.00
Bore Sighting Customer Gun
$25.00
DRILL AND TAP BARREL OR RECEIVER FOR SIGHTS
Per Hole
$32.00
Cut Dovetail in Barrel
$85.00
Install Insert in Pistol Sight
$50.00
INSTALL RECEIVER SIGHTS
SCOPE MOUNTING
Gun Drilled and Tapped
$45.00
Gun Drilled and Tapped
$55.00
GENERAL BARREL, ACTION & RIFLE WORK
Check Headspace
$45.00
Remove Stuck Fired Case from Chamber
Hourly Rate
Remove Live Round from Chamber
$150.00
Remove Obstruction from Bore
Hourly Rate
Rifles and Shotguns / Handguns
$75.00
CUT AND CROWN BARREL
CHAMBER AND FIT BARREL TO ACTION (includes crowning)
Precision Threading and Chambering Does not include the cost of the barrel or refinishing
$290.00
INSTALL PRE-THREADED AND CHAMBERED
Barrel - Not including Polishing & Bluing
$135.00
Lap in Bolt Lugs - (Not including setting back barrel or fitting new barrel)
$65.00
Turndown/Thread Bolt Handle – Lathe Turned/ Threaded
$65.00
TRIGGERS (Installation or adjustment)
Shilen, Timney, Dayton-Traister, Moyer Type, AR15 (Giessele, Wilson, etc)
$60.00
Geissele Hi-Speed National Match
$75.00
Install Muzzle Brake (Thread, Time, and Blend)
$175.00
Thread Barrel for Muzzle Brake/Device (Includes Cut, Crown, Lathe Thread)
$125.00
HANDGUN WORK
1911 Trigger Job
Series 70 3-5 lbs Includes installation of match alluminum trigger
$135.00
Series 70 3-5 lbs Includes installation of match alluminum trigger and hammer
$165.00
Series 80 3-5 lbs Includes installation of match alluminum trigger
$175.00
Seies 80 3-5 lbs Includes installation of match alluminum trigger and hammer
$180.00
Taurus PT 1911 3-5 lbs Includes installation of match alluminum trigger
$195.00
Semi-Auto Pistol Action Job - Clean, Smooth Action (not including any parts)
$130.00
Tighten Slide of 1911 Auto
$105.00
FIT BARREL TO 1911 AUTO
(Not including barrel)
Non-Ramped Barrel
Service $100.00 | Match $160.00
Ramped Barrel
Service $100.00 | Match $175.00
FIT AND INSTALL BARREL BUSHING ON 1911 AUTO
Does Not Include Cost of Bushing
Service | Match $75.00
Bevel Magazine Well of 1911 Auto
$63.00
Open and Modify Ejection Port of 1911 Auto Slide
$100.00
Throat, Polish Barrel and Feed Ramp of 1911 Auto
$85.00
Fit New Trigger to 1911 (Does not include cost of trigger)
$65.00
Fit Custom Hammer to 1911 (Does not include cost of hammer)
$85.00
CUT SLIDE FOR BO-MAR
(Without sight)
Plain Cut
$135.00
With Side Shields
$170.00
Cut Slide for Dovetail Front Sight (Without cost of sight)
$80.00
Cut Slide for Novak Rear (Without cost of sight)
$135.00
Install Stake-On Front (Without cost of sight)
$55.00
Install Front Sight (Existing dovetail)
$32.00
Install Rear Sight (Existing dovetail, w/o cost of sight)
$32.00
Dehorn & Break Edges for Carry (Without cost of including refinishing)
$85.00
​​​​​​​​MODIFY 1911 AUTO FRAME FOR BEAVERTAIL SAFETY
Includes Fitting/Blending of Safety (Does NOT include cost of safety or refinishing)
$160.00
​GLASS BEDDING
Hunting Rifle
$100.00
Match Rifles, M-1 Garand, M1A, etc
$260.00
Pillar Bed
$125.00
AR-15/ AR10 UPPER RECEIVER & LOWER RECEIVER ASSEMBLY SERVICES
​
NOTE: AR assembly prices vary because some Receivers and Parts kits require extensive fitting and tuning to work properly. DOES NOT include any CUSTOM WORK or RELIABILITY WORK. MOST Name Brand Receiver and Parts Kit assemblies are performed on the lower end of the Labor Quote, but remember OFF-BRAND Receivers and Parts Kits in most cases will result in the higher Labor Quote as they often require fitting and tuning to function reliably.
Assemble Lower Receiver* (Parts not included)
$65.00 - $125.00
Assemble Complete Upper Receiver* (Parts not included)
$75.00 - $175.00
True Upper Receiver Face
$30.00
Perm. Attach Muzzle Device (Blind pin/weld)
$52.00
Flash Hider, Install/Time (On threaded barrel)
$25.00
Barrel Change or Install
$55.00 minimum
Install Free-Float Tube/Handguards
$25.00 minimum
Install New Gas Block
$25.00 - $50.00
Buttstock Install
$20.00
BARREL WORK
Hand Crown Barrel (45 or 11 degrees)
$27.00
Hand Cut & Crown Barrel
$40.00
Lathe Crown Barrel (Stripped bbl)
$36.00*
Lathe Cut & Crown Barrel (Stripped barrel)
$47.00*
*Remove/Reattach Barrel for Lathe Work
+$20.00
Lathe Thread Barrel (Precision threads for suppressor)
$105.00*
Trigger Job, Standard Trigger Groups
$50.00 minimum
Install/Adjust Match Trigger Group
$60 minimum
